AIMS Power Solar Kit 760 W Solar | 4000 W Pure Sine Inverter Charger 120/240VAC | 600 A Batteries

$6,044.00
In Stock Pre order Out of stock

HURRY! ONLY LEFT IN STOCK.

Add to Wishlist

This kit has been designed to power appliances up to 33 amps at 120V or 16 at 240V. Ideal for refrigerators, freezers, heaters, lights, fans, electronics and other medium size appliances. Perfect for an off grid location needing to power only a few items at a time or as a standby back up power solution. The powerful panels provide 760 watts of solar power and will keep your batteries charged as long as you have sunlight. 

  • Easy to connect and use
  • Everything included except mounting/racks for solar panels
  • Works with devices up to 1500 watts/ 12.5 AC amps 110 VAC
  • Ideal for any equipment that needs standby back up or off grid power
  • Perfect for a small home, cabin or business
  • Need @48 sq ft available for solar panels

*The solar panel array will recharge a 50% depleted 600 amp battery bank  in under 5 hours with full sunlight.*

Specs

760 WATT SOLAR WITH 4000 WATT PURE SINE INVERTER  CHARGER OFF GRID SOLAR KIT

Specifications: 760 WATT SOLAR KIT 4000 WATT PURE SINE INVERTER OFF GRID

You can find the specifications for each product by clicking on the links below.

This solar kit includes:

  • PICOGLF40W12V240VS – 4000 watt pure sine inverter charger 33 amps @120VAC and 15 @240VAC 
  • PV190MONO – qty 4 – 190 watt mono solar panel @48 SQ FT
  • Quick disconnect – DC1600V32A2IO
  • Pre wired solar array combiner box
  • SCC60AFM – 60 amp MPPT solar charge controller
  • AGM12V200A – qty 3 – 200 ah AGM deep cycle batteries
  • PV100FTSET – 100 foot 10AWG PV wires for solar panels to charge controller male & female
  • PVF100FT10AWG – 100 foot PV wire for solar panel to disconnect switch (female)
  • PVM100FT10AWG – 100 foot PV wire for solar panel to disconnect switch (male)
  • PVF20FT10AWG – male and female panels to combiner box, combiner box to disconnect and disconnect switch to charge controller
  • PICGLFBATS – Battery temperature sensor
  • CBL06FT8AWGC- 8 ft set of 6 AWG cable to connect charge controller to battery bank
  • ANL80KITJ – 80 amp fuse kit for charge controller to battery bank
  • CBL06FT4/0 – 6 ft set of 4/0 AWG cable set battery bank to inverter
  • CBL02FT4/0 – qty 2 – 2 ft set of 4/0 cable (battery cables for parallel connection)
  • ANL500KITWJUMP – 500 amp inline fuse kit with jumper for batteries to inverter

Owner's Manual

Refund & Return Policy

Warranty

All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated:

  • 1-Year for non ETL (Extract, Transform and Load) units
  • 2-Years for ETL (Extract, Transform and Load) units and batteries
  • 3 Years for generators
  • Batteries – product specific
  • Solar products – product specific
  • Cables – 10 years

Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products.

NO REFUNDS AFTER 30 DAYS. REPAIR OR REPLACE ONLY.

Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.
The warranty does not cover the following:

  • Products that AIMS Power™ determine, in its sole discretion, to be free of any material or workmanship defects or flaws
  • Products evidencing excessive wear, misuse or alteration
  • Products with missing or defaced labels, stickers, serial numbers or other identifying information
  • Improper care or storage (e.g. water damage, exposure to extreme heat or cold temperatures, unsanitary environment)
  • Alterations or customizations
  • Items that were purchased second hand, or from an unauthorized seller (if you want to know if a seller is authorized, call us at 775-359-6703)
  • Items outside of the covered warranty period


RECEIVING YOUR ORDER – Be sure to inspect for any damage or incorrect quantities BEFORE signing for the product. If you accept the product, make sure to have the carrier NOTE the damage before signing.

Warranty Return Process

It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.

  • Contact AIMS Power™ via the AIMS Power return portal at https://aimspower.returnsportal.net/ to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.

Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.

  • An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.
  • Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.

Other Items of note:

  • AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 30 days.
  • Any requested information that is not provided in a timely manner could result in delayed processing of your return.
  • When shipping the product for a return:
    • Ensure the product is packed accordingly to avoid being damaged in-transit.  Include original packaging. Use proper protective material to ensure package arrives without damage.
    • Ensure some form of shipment tracking is used.
    • It is strongly recommended to insure the shipment.
    • AIMS Power™ is not liable for products that are lost or damaged in-transit.
  • The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.
  • For any other questions please contact us via phone or email.
Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)