AIMS Power introduces the new all-in-one solar kit for all of your off grid power needs. Whether you’re supplying power to an off-grid home/cabin or looking for a back-up power source for a small business , this solar kit includes all necessary products required bundled for your convenience.  The 720 watt solar kit includes an pure sine inverter charger that has a built in battery charger to recharge the batteries when 240 Vac city or generator power is available.  The 4000 watt pure sine inverter charger can power 110/120 and 220/230/240 Volt appliances, electronics, tools and pumps. The panels are covered in tempered glass to protect from hazardous weather. The PV wiring is protected against UV, water, ozone, fluids, oil, salt and general weathering. The 12 Volt 200 amp AGM deep cycle batteries provide quality power.  Each system comes with a wiring diagram upon purchase.

• Easy to connect and use
• Everything included except mounting/racks for solar panels
• Works with devices up to 4000 watts/ 33 AC amps 120 VAC / 16.6 AC amps 240 VAC
• Ideal for any equipment that needs standby back up or off grid power
• Perfect for a small home, cabin or business
• Need @75 sq ft available for solar panels

*The solar panel array will recharge a 50% depleted 800 amp battery bank  in under 7 hours with full sunlight.*

Specs

720 WATT SOLAR WITH 4000 WATT PURE SINE INVERTER  CHARGER OFF GRID SOLAR KIT

Specifications: 720 WATT SOLAR KIT 4000 WATT PURE SINE INVERTER OFF GRID

You can find the specifications for each product by clicking on the links below.

This solar kit includes:

• PICOGLF40W12V240VS – 4000 watt pure sine inverter charger 33 amps @120VAC and 15 @240VAC 
• PV120MONO – qty 6 – 120 watt mono solar panel @75 SQ FT  info
• Quick disconnect – DC1600V32A2IO
• Pre wired solar array combiner box 3 string
• SCC60AFM – 60 amp MPPT solar charge controller
• AGM12V200A – qty 4 – 200 ah AGM deep cycle batteries 
• PV100FTSET – 100 foot 10AWG PV wires for solar panels to charge controller male & female
• PVF100FT10AWG – 100 foot PV wire for combiner box to disconnect switch (female)
• PVM100FT10AWG – 100 foot PV wire for combiner box to disconnect switch (male)
• PVF20FT10AWG – male and female extender wire for panels to combiner box, combiner box to disconnect and disconnect switch to charge controller
• PICGLFBATS – Battery temperature sensor
• CBL06FT8AWGC- 8 ft set of 6 AWG cable to connect charge controller to battery bank
• ANL80KITJ – 80 amp fuse kit for charge controller to battery bank
• CBL08FT4/0 – 8 ft set of 4/0 AWG cable set battery bank to inverter
• CBL02FT4/0 – qty 3 – 2 ft set of 4/0 cable (battery cables for parallel connection)
• ANL500KITWJUMP – 500 amp inline fuse kit with jumper for batteries to inverter

Owner's Manual

• Global LF Series Pure Sine Wave Inverter Charger User’s Manual
• Monocrystalline Solar PV Module 330 WATTS Manual
• AIMS Power Solar Array Combiner Box Manual
• AIMS Power PV Solar Quick Disconnect Switch
• Solar Charge Controller Manual
  

Refund & Return Policy

Warranty

All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated:

• 1-Year for non ETL (Extract, Transform and Load) units
• 2-Years for ETL (Extract, Transform and Load) units and batteries
• 3 Years for generators
• Batteries – product specific
• Solar products – product specific
• Cables – 10 years

Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products.

NO REFUNDS AFTER 30 DAYS. REPAIR OR REPLACE ONLY.

Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.
The warranty does not cover the following:

RECEIVING YOUR ORDER – Be sure to inspect for any damage or incorrect quantities BEFORE signing for the product. If you accept the product, make sure to have the carrier NOTE the damage before signing.

Warranty Return Process

It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.

• Contact AIMS Power™ via the AIMS Power return portal at https://aimspower.returnsportal.net/ to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.

Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.

• An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.
• Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.

Other Items of note:

• AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 30 days.
• Any requested information that is not provided in a timely manner could result in delayed processing of your return.
• When shipping the product for a return:
• Ensure the product is packed accordingly to avoid being damaged in-transit.  Include original packaging. Use proper protective material to ensure package arrives without damage.
• Ensure some form of shipment tracking is used.
• It is strongly recommended to insure the shipment.
• AIMS Power™ is not liable for products that are lost or damaged in-transit.
• The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.
• For any other questions please contact us via phone or email.