Powerful all-in-one solar kit for all of your off grid or back up power needs. Whether you’re supplying power to a business office or whole house, this solar kit includes all necessary products and bundled for your convenience. This 3960 watts of solar and the 8,000 watt. 100/50amp output low frequency inverter charger 48VDC split phase 110/120/220/230/240 VAC along with 600 amps of battery power at 48VDC will keep you up and running.

The pure sine inverter has a built in smart charger, automatic transfer switch and can recharge the batteries when city or generator power is available.  If grid power is lost, your solar system will automatically kick in. The 48VDC is more efficient, generates less heat allowing you to use smaller cables and fuses. The mono crystalline panels are covered in tempered glass to protect from hazardous weather and the PV wiring is protected against UV, water, ozone, fluids, oil, salt and general weathering.

Everything you need for an off grid or backup solar system (mounting brackets/racks excluded)

• Works with large size appliances up to 8000 watts/ 33 AC amps @ 240VAC and 66AC amps @ 120VAC
• Ideal for tools, pumps, compressors, appliances and electronics
• Automatically switches from grid power to solar power or can be used for all off grid applications
• Need @210 SQ FT available for solar panels

*The solar panel array will recharge a 50% depleted 600 amp battery bank in <5 hours with full sunlight.*

Specs

3960 WATT SOLAR WITH 12,000 WATT PURE SINE POWER INVERTER CHARGER 48VDC 120/240VAC OFF GRID KIT

KIT COMPONENTS

• 12,000 watt pure sine inverter charger 120/240vac ETL and CSA certified PICOGLF80KW48V240VS
• 330 watt mono solar panel  Qty 12 – PV330mono @210 SQ FT
• Combiner Box 6 String– Pre-wired
• 80 amp MPPT solar charge controller SCC80AMPPT
• Quick Disconnect Switch DC1600V32A2IO
• 200 ah AGM deep cycle battery maintenance free sealed lead acid AGM12V200A – Qty 12

• PICOGLFBATS – qty 1 – battery temperature sensor
• PVEXT20FT10AWG – PV female & male extension cables for solar array to combiner box and disconnect to solar charge controller
• PVM100FT10AWG – 100 foot PV wire for solar panel (male) from combiner box to disconnect
• PVF100FT10AWG – 100 foot PV wire for solar panel (female) from combiner box to disconnect
• CBL08FT6AWGC – 8 ft set charge controller to battery cables
• CBL08FT1/0AWG- 8 ft set of 4 AWG cable battery bank to inverter
• CBL02FT1/0AWG– qty 2 -2 ft 4 AWG cable (battery cables)
• CBL01FT1/0AWGRED – qty 7 – 1 ft jumper for fuse kit and battery jumpers
• ANL300KIT – 300 amp inline fuse kit for battery to inverter
• ANL100KIT – 100 amp inline fuse kit for charge controller to battery
• PVEXT15FT10AWG – qty 2 -15 ft PV extension wires male and female to connect solar panels in parallel

Owner's Manual

• Global LF Series Pure Sine Wave Inverter Charger User’s Manual
• Monocrystalline Solar PV Module 330 WATTS Manual
• AIMS Power Solar Array Combiner Box Manual
• Solar Charge Controller Manual
• AIMS Power PV Solar Quick Disconnect Switch

Refund & Return Policy

Warranty

All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated:

• 1-Year for non ETL (Extract, Transform and Load) units
• 2-Years for ETL (Extract, Transform and Load) units and batteries
• 3 Years for generators
• Batteries – product specific
• Solar products – product specific
• Cables – 10 years

Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products.

NO REFUNDS AFTER 30 DAYS. REPAIR OR REPLACE ONLY.

Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.
The warranty does not cover the following:

RECEIVING YOUR ORDER – Be sure to inspect for any damage or incorrect quantities BEFORE signing for the product. If you accept the product, make sure to have the carrier NOTE the damage before signing.

Warranty Return Process

It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.

• Contact AIMS Power™ via the AIMS Power return portal at https://aimspower.returnsportal.net/ to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.

Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.

• An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.
• Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.

Other Items of note:

• AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 30 days.
• Any requested information that is not provided in a timely manner could result in delayed processing of your return.
• When shipping the product for a return:
• Ensure the product is packed accordingly to avoid being damaged in-transit.  Include original packaging. Use proper protective material to ensure package arrives without damage.
• Ensure some form of shipment tracking is used.
• It is strongly recommended to insure the shipment.
• AIMS Power™ is not liable for products that are lost or damaged in-transit.
• The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.
• For any other questions please contact us via phone or email.