AIMS Power Solar Kit 240 W Solar | 300 W Pure Sine Inverter 24VDC | 200 A Batteries
AIMS Power introduces the new all-in-one solar kit for all of your off grid power needs. Whether you’re supplying power to a small electronic device in a bus/van or lighting for in a home , this solar kit includes all necessary products required and bundled for your convenience. This 240 watt solar kit is most effective when used to power small devices. The 300 watt 24 VDC inverter runs more efficiently and is pure sine, safe to use with almost any device up to 2.5 amps. Because this kit runs at 24V, you can use more solar panels with the included 10 amp charger at 24VDC if needed. The panels are covered in tempered glass to protect from hazardous weather. The PV wiring is protected against UV, water, ozone, fluids, oil, salt and general weathering. The powerful 100 amp batteries provide enough power for your small electronics and will stay charged with optimal sunlight. Each system comes with a wiring diagram upon purchase. Double the power compared to the “all in one” options.
- Easy to connect and use
- Works with small size devices up to 300 watts/ 2.5 AC amps
- Ideal for computers, video games, lights, electronics and cell phones
- Expandable – supports multiple batteries
- Total panel dimensions are @12 sq ft
*The solar panels will recharge a 50% depleted 200 amp battery bank in 5 hours with full sunlight.*
Specs
This solar kit includes:
- PWRI30024S – 300 watt inverter 2.5 amps for more info
- PV120MONO – qty 2 – 120 watt mono solar panel @12 SQ FT for more info
- SCC10APWM – 10 amp PWM solar charge controller for more info
- AGM12V100A – qty 2 – 100 ah AGM deep cycle battery for more info
- PV100FTSET – 100 foot 10AWG PV wires for solar panels to charge controller male & female
- PVL30FT – 30 foot PV wire for Charge Controller to Battery (cut to lugged ends for battery)
- CBL06FT8AWG – 6 ft 8AWG set of cables battery bank to inverter
- CBL01FT8AWGRED – 1 ft jumper for fuse kit
- ANL50KIT – 50 amp inline fuse kit
- Solar inline fuse 15A
Refund & Return Policy
Warranty
All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated:
- 1-Year for non ETL (Extract, Transform and Load) units
- 2-Years for ETL (Extract, Transform and Load) units and batteries
- 3 Years for generators
- Batteries – product specific
- Solar products – product specific
- Cables – 10 years
Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products.
NO REFUNDS AFTER 30 DAYS. REPAIR OR REPLACE ONLY.
Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.
The warranty does not cover the following:
- Products that AIMS Power™ determine, in its sole discretion, to be free of any material or workmanship defects or flaws
- Products evidencing excessive wear, misuse or alteration
- Products with missing or defaced labels, stickers, serial numbers or other identifying information
- Improper care or storage (e.g. water damage, exposure to extreme heat or cold temperatures, unsanitary environment)
- Alterations or customizations
- Items that were purchased second hand, or from an unauthorized seller (if you want to know if a seller is authorized, call us at 775-359-6703)
- Items outside of the covered warranty period
RECEIVING YOUR ORDER – Be sure to inspect for any damage or incorrect quantities BEFORE signing for the product. If you accept the product, make sure to have the carrier NOTE the damage before signing.
Warranty Return Process
It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.
- Contact AIMS Power™ via the AIMS Power return portal at https://aimspower.returnsportal.net/ to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.
Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.
- An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.
- Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.
Other Items of note:
- AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 30 days.
- Any requested information that is not provided in a timely manner could result in delayed processing of your return.
- When shipping the product for a return:
- Ensure the product is packed accordingly to avoid being damaged in-transit. Include original packaging. Use proper protective material to ensure package arrives without damage.
- Ensure some form of shipment tracking is used.
- It is strongly recommended to insure the shipment.
- AIMS Power™ is not liable for products that are lost or damaged in-transit.
- The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.
- For any other questions please contact us via phone or email.