This 6V AGM battery is a heavy duty, deep cycle battery ideal for back-up power, golf carts and stored power applications. Affordable without compromising quality, this battery will provide power for years. This heavy duty rechargeable battery is made of AGM lead lead dioxide technology. The extra thick lead plates in this battery allow for a deeper discharge with less harm to the battery and provides 20% more charge/discharge cycles compared to other AGM batteries.  This AGM battery has less instant energy, but greater long-term energy delivery.   The dilute sulfuric acid electrolyte is absorbed by separators and plates, thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, special one-way valves allow the gases to escape, avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak-proof and usable in any position. Perfect for applications requiring large amounts of power and provides longer run time. 

Starting batteries, such as car batteries should not be used for deep cycle applications because of the thinner plates in these batteries. They are more prone to warping and pitting when discharged.

You can connect these batteries in series or parallel depending on DC voltage needed. Most common 12, 24, 36 and 48 volt configurations.

Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding. Not restricted for air transport complies with IATA/ICAO Special Provision A67. UL-recognized component.

• Heavy duty compared to other AGM batteries – 20% more cycles 
• Mount in any orientation.
• Computer designed lead calcium tin alloy grid for high power density
• AGM is ideal for back up and stored power applications
• Convenient removeable carry handle
• Long service life float or cyclic applications
• Maintenance-free operation
• Low self discharge
• Copper terminals

Specs

• Nominal voltage 6V
• Number of cell 3
• Design life 10 years with proper maintenance
• Nominal capacity 77oF(25oC)
• 220 hour rate (22.5A 5.4V) 230Ah
• 5 hour rate (40A 5.25V) 196Ah
• 1 hour rate (153A 4.8V) 147Ah
• Internal resistance
• Fully charged battery 77oF(25oC) 3.2mOhms
• Self-discharge
  • 3% of capacity declined per month at 20oC(average)
• Operating temperature range
  • Discharge -20~60oC
  • Charge -10~60oC
  • Storage -20~60oC
• Max. discharge current 77oF(25oC) 1000A(5s)
• Short circuit current 3800A
• Charge methods: Constant Voltage Charge 77oF(25oC)
• Cycle use 2.4 – 2.45 V per
• Maximum charging current 67.5A
• Temperature compensation -15mV/oC
• Standby use 2.2 – 2.3 V per
• 13L x 9H x 7W
• Weight(lb) 71
• 5 year warranty from manufacturer defects

Owner's Manual

• AIMS Power AGM Battery User Manual

Refund & Return Policy

Warranty

All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated:

• 1-Year for non ETL (Extract, Transform and Load) units
• 2-Years for ETL (Extract, Transform and Load) units and batteries
• 3 Years for generators
• Batteries – product specific
• Solar products – product specific
• Cables – 10 years

Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products.

NO REFUNDS AFTER 30 DAYS. REPAIR OR REPLACE ONLY.

Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.
The warranty does not cover the following:

RECEIVING YOUR ORDER – Be sure to inspect for any damage or incorrect quantities BEFORE signing for the product. If you accept the product, make sure to have the carrier NOTE the damage before signing.

Warranty Return Process

It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.

• Contact AIMS Power™ via the AIMS Power return portal at https://aimspower.returnsportal.net/ to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.

Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.

• An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.
• Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.

Other Items of note:

• AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 30 days.
• Any requested information that is not provided in a timely manner could result in delayed processing of your return.
• When shipping the product for a return:
• Ensure the product is packed accordingly to avoid being damaged in-transit.  Include original packaging. Use proper protective material to ensure package arrives without damage.
• Ensure some form of shipment tracking is used.
• It is strongly recommended to insure the shipment.
• AIMS Power™ is not liable for products that are lost or damaged in-transit.
• The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.
• For any other questions please contact us via phone or email.