Our ETL-listed UL 1741 Standards 48V DC to 120/240V AC inverter chargers are ideal for backup and off-grid systems. With a 48V DC input, they boast high efficiency, especially in larger setups, attracting sustainability enthusiasts seeking optimal efficiency.

Primarily used for emergency backup in residences and businesses, they offer up to 12,000 watts continuous power and 36,000 watts surge (model-dependent). Recharge your battery bank using AIMS Power solar panels for cleaner energy.

Featuring a direct-connect terminal block for a 300% surge, it's perfect for hunting cabins or off-grid homes. Built to withstand heat, temperature fluctuations, humidity, and dust, ensuring reliability for emergency backup in any setting.

Highly versatile, this split-phase inverter outputs 110/120 or 220/230/240 Vac and is switchable between 50 or 60Hz, making it usable globally. AIMS Power offers top-notch, repairable inverters with a free two-year warranty and tech support, providing peace of mind for your electrical system.

Features:

• 8000 Watt low frequency inverter 110/120/220/230/240 Vac Split Phase
• 24000 Watt surge for 20 seconds -3x surge capability
• ETL Listed to UL 1741 Standards
• CSA STDC 22.2 NO.107.1
• Battery priority selector
• AC direct connect terminal block
• Marine coated and protected
• Multi stage smart charger 80 Amp charges GEL, Lead, AGM, Lithium
• Three cooling fans – thermal and load based
• Remote panel available
• 60hz or 50 hz selectable dip switch
• 10msec typical transfer time
• Mounting plate included
• Selectable 25W power save mode (hibernation)
• 8 battery charger settings
• 4 stage battery charger
• 2 year warranty

Specs

Inverter Output Specifications:

• Continuous Output Power: 8000 Watts
• Surge Rating: 24000 Watts (20 Seconds)
• Output Waveform: Pure Sine/Same as input (Bypass Mode)
• 100-110-120Vac / 220-230-240Vac
• Nominal Efficiency: >88% (Peak)
• Line Mode Efficiency: >95%
• Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
• Typical Transfer Time: 10ms (Max)
• THD: < 7% under full linear load
• Ambient operating temperature: 14°F to 122°F (-10°C to 50°C)

Input Specifications

• Nominal input voltage: 48.0Vdc
• Low battery alarm: 42.0Vdc-44.0Vdc
• Low battery trip: 40.0Vdc-42.0Vdc
• High voltage alarm: 64.0Vdc
• Low battery voltage restart: 62.0Vdc
• Idle consumption: 100 Watts
• Power saver mode idle consumption: <25 Watts
• Automatic transfer switch – 50A @ 220/230/240V
• Bypass – 50A @ 220/230/240V

Charger Specifications

• Output voltage: depends on battery type
• Charger rate: 80A
• Four stage smart charger with current adjust dial 20-100% 

Dimensions

• Unit weight: 132 lbs.
• Unit size L x W x H: 23.3 x 16.3 x 7.9 inches
• Shipping weight: 176 lbs.
• Shipping size L x W x H 30 x 21.25 x 15.25 inches

Owner's Manual

• Global LF Series Pure Sine Wave Inverter Charger User’s Manual

Refund & Return Policy

Warranty

All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated:

• 1-Year for non ETL (Extract, Transform and Load) units
• 2-Years for ETL (Extract, Transform and Load) units and batteries
• 3 Years for generators
• Batteries – product specific
• Solar products – product specific
• Cables – 10 years

Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products.

NO REFUNDS AFTER 30 DAYS. REPAIR OR REPLACE ONLY.

Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.
The warranty does not cover the following:

RECEIVING YOUR ORDER – Be sure to inspect for any damage or incorrect quantities BEFORE signing for the product. If you accept the product, make sure to have the carrier NOTE the damage before signing.

Warranty Return Process

It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.

• Contact AIMS Power™ via the AIMS Power return portal at https://aimspower.returnsportal.net/ to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.

Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.

• An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.
• Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.

Other Items of note:

• AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 30 days.
• Any requested information that is not provided in a timely manner could result in delayed processing of your return.
• When shipping the product for a return:
• Ensure the product is packed accordingly to avoid being damaged in-transit.  Include original packaging. Use proper protective material to ensure package arrives without damage.
• Ensure some form of shipment tracking is used.
• It is strongly recommended to insure the shipment.
• AIMS Power™ is not liable for products that are lost or damaged in-transit.
• The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.
• For any other questions please contact us via phone or email.