At 7000 watts and up to 14000 watts for 9 seconds, 48 VDC the Industrial Grade Modified Sine Wave Power Inverter promises to be a complete solution for any power need you present. From recreation to industrial applications or off-grid home and solar power needs, this 7000 watt modified sine wave inverter delivers enough durable power for high end equipment that requires substantial electricity powering items that require 240 VAC. This digitally outputted and phase corrected inverter is the recommended power solution for clean reliable output without noise or distortion. Delivering an incredible 7000 watts of continuous power this utility-grade inverter was designed to reproduce the quality of electricity provided by power companies to create a stable AC power source. This inverter supplies ample power to run large pumps compressors power tools multiple appliances job sites and even a small house! It has PWM programming which corrects any fluctuation in voltage or frequency caused by battery fluctuation or sudden surges in power usage. It also has a longer than average surge time (9 seconds when over 7000 watts).

• 7000W max continuous power
• Modified sine wave
• Power switch LED is also a self test light – Green
• Overload fail LED – Red
• Over Temperature LED indicator
• Over Load LED indicator
• 1 ac receptacles universal 240 volt
• Direct connect terminal block for full load applications
• On/off switch
• Over Temperature protection
• Over Load protection
• Thermally controlled fan
• DC volt Meter – Input meter
• Percent load usage LED bar
• Externally located re-settable circuit breakers
• ac output short circuit protection
• Aluminum case for optimal cooling
• Pre-wired for remote on/off switch
• Pre-slotted mounting plate
• Instruction manual
• Free 1 year tech support
• 1 Year Warranty Parts and Labor

 Specs

• Continuous output power: 7000 Watts
• Surge power capability (peak power): 14,000 Watts 
• The surge duration is electronically controlled and permits up to 9 seconds while the output is between 7000 and 14,000 watts.  During this time the buzzer will sound until the inverter electronically shuts down.

• dc input / operating voltage: 42-60 Volts
• Output voltage: 240 Volts ac +/- 10%
• Output wave form: modified sine wave with phase correction
• Output frequency: 50/60 Hz +/- 1 Hz
• Battery low voltage alarm: 42 +/- 0.5 Volts
• Battery low voltage shutdown: 41.5 +/- 0.5 Volts   
• High input voltage protection 60 +/-0.5 volts
• No load current: 0.18 A (fan off) 0.66 A (fan on)
• Start up AC amps: 58
• Continuous AC amps: 29
• Full load efficiency: 90%
• Auto Cooling Fan Start at 107 degrees F
• Full load maximum operating temperature: 154 degree F
• AC Output Socket Type: single Type 240 volt plug
• Internal fuse protection
• Product size (D x W x H): 21.26” X 8.43” X 5.35”
• Weight: 31 lbs

Owner's Manual

• AIMS Power 7000 Watt 48 Volt 240 Vac Power Inverter User Manual

Refund & Return Policy

Warranty

All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated:

• 1-Year for non ETL (Extract, Transform and Load) units
• 2-Years for ETL (Extract, Transform and Load) units and batteries
• 3 Years for generators
• Batteries – product specific
• Solar products – product specific
• Cables – 10 years

Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products.

NO REFUNDS AFTER 30 DAYS. REPAIR OR REPLACE ONLY.

Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.
The warranty does not cover the following:

RECEIVING YOUR ORDER – Be sure to inspect for any damage or incorrect quantities BEFORE signing for the product. If you accept the product, make sure to have the carrier NOTE the damage before signing.

Warranty Return Process

It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.

• Contact AIMS Power™ via the AIMS Power return portal at https://aimspower.returnsportal.net/ to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.

Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.

• An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.
• Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.

Other Items of note:

• AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 30 days.
• Any requested information that is not provided in a timely manner could result in delayed processing of your return.
• When shipping the product for a return:
• Ensure the product is packed accordingly to avoid being damaged in-transit.  Include original packaging. Use proper protective material to ensure package arrives without damage.
• Ensure some form of shipment tracking is used.
• It is strongly recommended to insure the shipment.
• AIMS Power™ is not liable for products that are lost or damaged in-transit.
• The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.
• For any other questions please contact us via phone or email.