This 2U rackmount inverter is ideal for providing backup power to your essential equipment such as: telecom, audio/visual and computers. It will generate 2000W of high quality pure sine power at a stable 120Vac output. Power is maintained to your equipment seamlessly through a built in 20 Amp transfer switch with a typical transfer time of less than 20msec. The transfer switch will by-pass city/utility power when it is available, and when city/utility power is lost the inverter will automatically switch to the backup DC power source. In backup mode the inverter will supply power as long as the DC power supply provides enough voltage. Remote monitoring of the inverter is available through an RS232 communication port which affords the user with real-time monitoring of the DC input voltage, AC output voltage, Frequency, and Amps. This inverter is not a -48VDC. To work with -48 Telecom systems, the inverter must be connected directly to the battery bank or positive 48 VDC system. The inverter must bypass the power supply.
AIMS Power 2000 Watt 48 Volt DC Rack Mount Inverter To 120 Volt AC – 2U
$899.00
In Stock
Pre order
Out of stock
No reviews
HURRY! ONLY LEFT IN STOCK.
- 2000W continuous power , 48 volt to 120 volt
- Pure sine wave
- 2U Rack Mount Inverter
- FCC Class B
- RS232 Communication Port – Monitored from a PC
- Input dc voltage
- Output ac voltage
- Frequency
- AC Current
- Digital Status Display – Toggle
- Input dc voltage
- Output ac voltage
- Frequency
- AC Current
- Dual ac receptacle
- On/off switch
- Utility Power Bypass
- Automatic Transfer Switch
- Over temperature indicator
- Overload protection
- Low battery voltage warning/shutdown
- High input voltage protection with automatic shutdown
- Over load indicator
- Short circuit protection
- Thermal and Load based fan
- ac output short circuit protection
- Instruction manual
- Free 1 year tech support
- 1 Year Warranty Parts and Labor
Specs
- Continuous output power: 2000 Watts
- Surge power capability (peak power): 4000 Watts
- dc input / operating voltage: 41.0 to 60.0 Volts
- Output voltage: 120 Volts ac
- Output wave form: pure sine wave
- Output frequency: 60 Hz
- Low battery voltage shutdown: 40.2 Volts
- Low battery voltage recovery: 42.5 Volts
- High battery shutdown: 61 Volts
- High battery power return: 59 Volts
- Low battery voltage warning/shutdown
- No load power consumption: Fan Off 0.35A dc – Fan On 0.55A dc
- Frequency: 60hz
- Efficiency: 91%
- Over temperature protection low: -4 degrees F ± 5 degrees F
- Over temperature protection high: 172 degrees F ± 5 degrees F
- Transfer Switch Time: 16-18 msec s F
- Operating temperature recovery: 136 degrees F (automatic shutdown) ± 5 degrees F
- AC Output Socket Type: dual Type 2 -3 prong
- RS232 Communication Port
- AC Output and Bypass Protected 20A Breaker
- FCC Class B – F690501/RF-EMC000377(H)
Dimensions:
- Unit Weight: 22 lbs.
- Unit Size L x W x H: 17.3 x 16.5 x 3.5 inches
Owner's Manual
Refund & Return Policy
Warranty
All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated:
- 1-Year for non ETL (Extract, Transform and Load) units
- 2-Years for ETL (Extract, Transform and Load) units and batteries
- 3 Years for generators
- Batteries – product specific
- Solar products – product specific
- Cables – 10 years
Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products.
NO REFUNDS AFTER 30 DAYS. REPAIR OR REPLACE ONLY.
Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.
The warranty does not cover the following:
- Products that AIMS Power™ determine, in its sole discretion, to be free of any material or workmanship defects or flaws
- Products evidencing excessive wear, misuse or alteration
- Products with missing or defaced labels, stickers, serial numbers or other identifying information
- Improper care or storage (e.g. water damage, exposure to extreme heat or cold temperatures, unsanitary environment)
- Alterations or customizations
- Items that were purchased second hand, or from an unauthorized seller (if you want to know if a seller is authorized, call us at 775-359-6703)
- Items outside of the covered warranty period
RECEIVING YOUR ORDER – Be sure to inspect for any damage or incorrect quantities BEFORE signing for the product. If you accept the product, make sure to have the carrier NOTE the damage before signing.
Warranty Return Process
It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.
- Contact AIMS Power™ via the AIMS Power return portal at https://aimspower.returnsportal.net/ to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.
Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.
- An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.
- Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.
Other Items of note:
- AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 30 days.
- Any requested information that is not provided in a timely manner could result in delayed processing of your return.
- When shipping the product for a return:
- Ensure the product is packed accordingly to avoid being damaged in-transit. Include original packaging. Use proper protective material to ensure package arrives without damage.
- Ensure some form of shipment tracking is used.
- It is strongly recommended to insure the shipment.
- AIMS Power™ is not liable for products that are lost or damaged in-transit.
- The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.
- For any other questions please contact us via phone or email.