• Pure sine
• ETL listed and conforms to UL458 standards
• Hard wire direct connect terminal block for AC
• 2000 watt continuous power
• 4000 watt surge
• Over voltage shutdown
• Bypass whether inverter is on or off
• Under voltage shutdown
• Intelligent cooling fan
• Automatic transfer switch 25 amps
• Conformal coated for marine applications
• AC pass through without being turned on or connected to a battery bank
• 25A resettable AC breaker
• No programming or DIP switch changes needed for operation
• Remote switch available
• Less than 20msec typical transfer time
• 2 year warranty

 Specs

• 2000 watts continuous
• 4000 watt surge (not recommended for start up applications)
• Built in automatic transfer switch 25 amp transfer <20 msec
• Bypass/throughput = 25 amps. Do not exceed, damage may occur and void warranty.
• DC input voltage 10-16V
• AC input voltage 120VAC +/-10%
• Output voltage 120VAC, 60HZ
• Efficiency 86-90%
• THD: <3%
• Over voltage shutdown 16VDC +/- .5V
• Under voltage shutdown 10VDC +/- .5V
• Under voltage alarm 10.3VDC +/- .3V
• Over temp protection 150 degrees F +/- 5 degrees F
• Thermal fan
• Pure sine output
• No load current: 1.2A
• Direct connect terminal block
• L x W x H: 21.5″ x 9.5″ x 3.8″
• Unit – 14.4 lbs
• Boxed – 18 lbs

Optional Remote
Part # REMOTEHF Optional Remote on/off switch (new flush mount design)
Dip switches to black out the lights if preferred.
L x W x H: 3 x 2.06 x 1

Owner's Manual

• AIMS Power 2000 Watt Power Inverter with Transfer User Manual

Refund & Return Policy

Warranty

All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated:

• 1-Year for non ETL (Extract, Transform and Load) units
• 2-Years for ETL (Extract, Transform and Load) units and batteries
• 3 Years for generators
• Batteries – product specific
• Solar products – product specific
• Cables – 10 years

Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products.

NO REFUNDS AFTER 30 DAYS. REPAIR OR REPLACE ONLY.

Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.
The warranty does not cover the following:

RECEIVING YOUR ORDER – Be sure to inspect for any damage or incorrect quantities BEFORE signing for the product. If you accept the product, make sure to have the carrier NOTE the damage before signing.

Warranty Return Process

It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.

• Contact AIMS Power™ via the AIMS Power return portal at https://aimspower.returnsportal.net/ to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.

Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.

• An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.
• Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.

Other Items of note:

• AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 30 days.
• Any requested information that is not provided in a timely manner could result in delayed processing of your return.
• When shipping the product for a return:
• Ensure the product is packed accordingly to avoid being damaged in-transit.  Include original packaging. Use proper protective material to ensure package arrives without damage.
• Ensure some form of shipment tracking is used.
• It is strongly recommended to insure the shipment.
• AIMS Power™ is not liable for products that are lost or damaged in-transit.
• The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.
• For any other questions please contact us via phone or email.