AIMS Power 1500 Watt Power Inverter with Battery Charger and Transfer Switch

$344.00
In Stock Pre order Out of stock

HURRY! ONLY LEFT IN STOCK.

Add to Wishlist

Do you need a power inverter to supply backup power for your home or an inverter charger for your RV or boat? This AIMS 1500-watt modified sine power inverter has been designed to meet your backup or mobile power inverter needs.

Our 1500-Watt Power Inverter with Battery Charger and Transfer Switch has a built-in transfer switch that allows you to plug it into a regular AC outlet in your home. When the power goes out, your lights, electronic equipment and appliances will stay on. That's because this power inverter automatically switches to run off your battery bank.

The charger built into this power inverter outputs 10 DC amps of charge. That will keep your batteries fully charged, so if and when the power does go out, your batteries will be ready to supply power to this backup power inverter.

The most common use for this modified sine inverter charger is to back up sump pumps in your basement. That can prevent flooding and other problems when a storm hits and knocks out your utility's power while swamping your neighborhood with rain.

This unit is a very high-quality power inverter charger. It is built to last and has been designed with sump pumps in mind to give you peace of mind to weather any storm.

AIMS Power has been producing this unit for nearly a decade. If you are looking for a more powerful inverter charger, like a 3000-watt power inverter with battery charger and transfer switch, we have 3000-watt inverter chargers available in both pure sine and modified sine.

  • 1500W max continuous power
  • Modified sine wave
  • Green LED indicates ac input power is functional and battery is charging
  • Transfer switch automatically switches when city power is lost
  • Red LED indicates ac input power is not functional and battery is being used
  • Dual ac receptacle
  • Over Temperature protection
  • Over Load protection
  • Single cooling fan operation
  • AC cable included to connect to shore power
  • Internally fuse protected
  • AC output short circuit protection
  • Aluminum case for optimal cooling
  • Pre-slotted mounting plate
  • Instruction manual
  • Free 1 year tech support
  • 1 Year Warranty Parts and Labor

 Specs

  • Continuous output power: 1500 Watts 3000 Watt Surge
  • Surge power capability (peak power): 3000 Watts
  • DC input / operating voltage: 10 to 15 Volts
  • Output voltage: 120 Volts ac
  • Output wave form: modified sine wave
  • Output frequency: 60 Hz +/- 1 Hz
  • Battery low voltage alarm: 10.5 +/- 0.5 Volts
  • Battery low voltage shutdown: 10.0 +/- 0.5 Volts
  • Efficiency: 85-90%
  • No load draw: .6 amps
  • AC amps: 13
  • DC amps: 125
  • AC Output Socket Type: dual Type 2 -3 prong
  • High input voltage protection: 15V
  • Low input voltage shutdown: 10V
  • Internal fuse protection
  • 3-10 sec transfer time between loosing ac input power and switching to providing ac output power
  • Product size (L x W x H): 15.5 X 7.75 X 3.25
  • Weight: Unit: 7 lbs Boxed: 9 lbs
  • UL maximum recommended per outlet 1500W

Owner's Manual

Refund & Return Policy

Warranty

All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated:

  • 1-Year for non ETL (Extract, Transform and Load) units
  • 2-Years for ETL (Extract, Transform and Load) units and batteries
  • 3 Years for generators
  • Batteries – product specific
  • Solar products – product specific
  • Cables – 10 years

Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products.

NO REFUNDS AFTER 30 DAYS. REPAIR OR REPLACE ONLY.

Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.
The warranty does not cover the following:

  • Products that AIMS Power™ determine, in its sole discretion, to be free of any material or workmanship defects or flaws
  • Products evidencing excessive wear, misuse or alteration
  • Products with missing or defaced labels, stickers, serial numbers or other identifying information
  • Improper care or storage (e.g. water damage, exposure to extreme heat or cold temperatures, unsanitary environment)
  • Alterations or customizations
  • Items that were purchased second hand, or from an unauthorized seller (if you want to know if a seller is authorized, call us at 775-359-6703)
  • Items outside of the covered warranty period


RECEIVING YOUR ORDER – Be sure to inspect for any damage or incorrect quantities BEFORE signing for the product. If you accept the product, make sure to have the carrier NOTE the damage before signing.

Warranty Return Process

It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.

  • Contact AIMS Power™ via the AIMS Power return portal at https://aimspower.returnsportal.net/ to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.

Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.

  • An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.
  • Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.

Other Items of note:

  • AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 30 days.
  • Any requested information that is not provided in a timely manner could result in delayed processing of your return.
  • When shipping the product for a return:
    • Ensure the product is packed accordingly to avoid being damaged in-transit.  Include original packaging. Use proper protective material to ensure package arrives without damage.
    • Ensure some form of shipment tracking is used.
    • It is strongly recommended to insure the shipment.
    • AIMS Power™ is not liable for products that are lost or damaged in-transit.
  • The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.
  • For any other questions please contact us via phone or email.
Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)